this document contains confidential and proprietary information and all design, manufacturing, reproduction, use, patent rights and sales rights are expressly reserved by samtec, inc. this document shall not be disclosed, in whole or part, to any unauthorized person or entity nor reproduced, transferred or incorporated in any other project in any manner without the express written consent of samtec, inc. proprietary note * * do not scale from this print "c" ref .745 ref 18.9 "d" ref .038 0.95 ref "a" "a" t-1g1-xx-x qth-30-xx-d-xx-a fig 1 -a: alignment pin option (style -01 & -02 only) (qth-090-01-x-d-a shown) "a" .155 ref 3.9 (see note 12) .008 ref 0.2 .644 ref 16.4 .235 5.97 ref = .571 14.50 (typ) 29 eq spcs @ .0197[.500] .047 ref 1.19 .7875 20.003 (typ) 02 01 c qth-xxx-xx-x-d-xxx no of positions -030, -060, -090, *-120, *-150 (per row) * (see note 11) row specification -d: double (use qth-30-xx-d-xx & qthh-30-xx-d-xx) option plating specification -f: 3 '' selective gold in contact area, matte tin on tail (use t-1sxx-xx-f & t-1gxx-xx-f) (see note 7) -l: 10 '' selective gold in contact area, matte tin on tail (use t-1sxx-xx-l & t-1gxx-xx-l) -h: 30 '' gold in contact area, 3 '' gold on tail (use t-1sxx-xx-h & t-1gxx-xx-g) -c: 50 '' selective gold in contact area, matte tin on tail (use t-1sxx-xx-c, t-1gxx-xx-l) lead style -01: .1680[4.267] -02: .2861[7.264] -03: .4043[10.269] -04: .6001[15.246] -05: .7181[18.240] -06: .8361[21.237] -07: .9542[24.237] -08: 1.1511[29.238] -09: .5224[13.269] -10: .5618[14.269] = see table 6, sht 3 -lc: locking clips (use lc-08-tm-01, see fig 2, sht 2)) -a: alignment pins (use qth-30-xx-d-xx-a for -01 & -02) (for -03 thru -10 see table 6, sht 3) -k: polyimide film (use k-dot-.276-.375-.005) (available on -01 thru -04, -09 & -10 only) (see fig 4, sht 2) -tr: tape & reel (-090 pos max) (-060 pos max w/ -gp option) (n/a on -05 thru -08) (see fig 12, sht 6) -gp: guide posts (available on -01 & -02 only) (use qth-30-xx-d-xx-x-gp) (see fig 8, sht 4) -fl: friction locks (see fig 8, sht 4) (not available with -gp) -rt1: retention option (see fig 10, sht 5) (only available on -01 lead style) (must use -a option) (use qth-30-01-d-xx-a-rt1 & t-1r36-01-f) (not available with -lc, -gp, or -fl) -l: latching option (see fig 11, sht 5) (only available on -01 lead style) (use qth-30-01-d-xx-l) (not available with -lc, -gp, -fl, or -rt1) (-060 pos max) "b" - .002 + .003 (see note 5 & 8) .098 ref 2.49 .015 ref 0.4 .031 ref 0.8 .280 7.11 .155 .003 3.94 0.08 (see note 12) section "a"-"a" c [.08] [.03] t-1sxx-xx-x (see table 1) (see note 10) (see note 8) see table 3 .080 2.03 ref .035 0.89 ref c cpc this sheet c1, c2, c3, c4, c5 sheet of unless otherwise specified, dimensions are in inches. tolerances are: decimals angles .xx: .01[0.3] 2 .xxx: .005[0.13] .xxxx: .0020[0.051] material: .5mm double row hs terminal assembly by: qth-xxx-xx-x-d-xxx dwg. no. description: do not scale drawing dean p 09-14-2010 6 1 sheet scale: 1.75:1 insulator: lcp ul94v-0, color: black terminal & ground plane: phos bronze f:\dwg\misc\mktg\qth-xxx-xx-x-d-xxx-mkt.slddrw notes: 1. represents a critical dimension. 2. minimum pushout force: 6 oz for C01 & -02, 8 oz for C03 thru C10. 3. minimum ground plane retention: 1 lb. 4. parts to be molded to position. 5. maximum variance of .002 [0.05]. applies to signal or grounds independent of the ground or signal pins respectively. 6. lead styles -03 thru -10: top body (qth) cannot have -a option. 7. -l plating can be substituted for -f plating. 8. ground plane press height must be .003 [0.07] less than the maximum height or .002 [0.05] greater than the minimum height of signal pin. 9. t-1r36 retention to body to be 1.0 lbf. 10. cut off burr not to exceed .003 [0.08] in any direction, burr plus tab height not to exceed .006 [0.15]. 11. for new applications requiring these positions, please contact samtec interconnect processing group. 12. pin can extend past wall .003 [0.08] max. 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322 revision bh
this document contains confidential and proprietary information and all design, manufacturing, reproduction, use, patent rights and sales rights are expressly reserved by samtec, inc. this document shall not be disclosed, in whole or part, to any unauthorized person or entity nor reproduced, transferred or incorporated in any other project in any manner without the express written consent of samtec, inc. proprietary note * * "r" ref "s" .020 [0.51] .276 7.01 .020 .020 0.51 0.51 fig 4 -k: polyimide film pad option (use k-dot-.276-.375-.005) "t" .035 ref 0.89 "d" ref (see table 2, sht 1) fig 3 -a: alignment pin option (qth-090-05-x-d-a shown) (same as fig 1, except as shown) (styles -03 thru -09, see table 6, sht 3) qthh-30-xx-d-xx-a qth-30-02-d-xx (see note 6) .038 1.0 ref .080 2.03 ref c l .055 1.40 .010 0.25 ref "d" (see table 2, sht 1) qth-30-xx-d-xx fig 2 -lc locking clip option (qth-090-01-x-d-lc shown) (same as fig 1, except as shown) .0800 2.032 .056 1.42 ref lc-08-tm-01 c l cpc this sheet c4, c13, c14 sheet of .5mm double row hs terminal assembly by: qth-xxx-xx-x-d-xxx dwg. no. description: do not scale drawing dean p 09-14-2010 6 2 sheet scale: 1.75:1 revision bh f:\dwg\misc\mktg\qth-xxx-xx-x-d-xxx-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322
this document contains confidential and proprietary information and all design, manufacturing, reproduction, use, patent rights and sales rights are expressly reserved by samtec, inc. this document shall not be disclosed, in whole or part, to any unauthorized person or entity nor reproduced, transferred or incorporated in any other project in any manner without the express written consent of samtec, inc. proprietary note * * .278 ref 7.07 .010 ref 0.25 .118 ref 3.00 .055 1.40 "b" "b" fig 5 (qth-090-03-x-d-lc shown) (same as fig 1, except as shown) t-1g1-xx-x qthh-30-01-d-xx qth-30-02-d-xx (see note 6) .265 ref 6.73 .0800 2.032 c l "e" - .001 + .003 (see note 5 & 8) .281 7.14 .037 ref 0.94 .155 .003 3.94 0.08 .053 1.33 'h' section "b"-"b" t-1s60-xx-x (see note 8) see note 10 [.08] [.03] c see table 2, sht 1 .432 10.97 ref "c" "c" fig 6 (qth-090-05-x-d shown) (same as fig 5, except as shown) qthh-30-03-d-xx .600 15.24 ref "d" "d" fig 7 (qth-090-07-x-d shown) (same as fig 5, except as shown) qthh-030-04-d-xx "e" - .001 + .003 (see note 5 & 8) .155 .003 3.94 0.08 section "c"-"c" scale 1.25 : 1 t-1s60-xx-x t-1g1-xx-x c see note 10 [.08] [.03] see table 2, sht 1 "e" - .001 + .003 (see note 5 & 8) .155 .003 3.94 0.08 section "d"-"d" scale 1.25 : 1 t-1s61-xx-x t-1g17-xx-x (see note 8) see note 10 c [.08] [.03] see table 2, sht 1 .003 max 0.08 tab height .006 max burr 0.15 + tab height detail 'h' scale 8 : 1 (see note 8) cpc this sheet c1, c2, c4, c5 sheet of .5mm double row hs terminal assembly by: qth-xxx-xx-x-d-xxx dwg. no. description: do not scale drawing dean p 09-14-2010 6 3 sheet scale: 1:0.571429 revision bh f:\dwg\misc\mktg\qth-xxx-xx-x-d-xxx-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322
this document contains confidential and proprietary information and all design, manufacturing, reproduction, use, patent rights and sales rights are expressly reserved by samtec, inc. this document shall not be disclosed, in whole or part, to any unauthorized person or entity nor reproduced, transferred or incorporated in any other project in any manner without the express written consent of samtec, inc. proprietary note * * "f" ref "g" ref .125 ref 3.18 fig 8 (qth-090-01-x-d-gp shown) (same as fig 1, except as shown) (available on -01 & -02 only) see table 8 c l "h" .233 5.91 ref .070 ref (typ) 1.78 fig 9 -fl: friction locks (not available with -gp option) (same as fig 1, except as shown) qth-30-xx-d-xx-x-fl 'e' 'f' .008 0.20 ref .015 ref 0.38 detail 'e' scale 12 : 1 .012 0.30 ref .015 ref 0.38 detail 'f' scale 12 : 1 cpc this sheet c6 sheet of .5mm double row hs terminal assembly by: qth-xxx-xx-x-d-xxx dwg. no. description: do not scale drawing dean p 09-14-2010 6 4 sheet scale: 2:1 revision bh f:\dwg\misc\mktg\qth-xxx-xx-x-d-xxx-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322
this document contains confidential and proprietary information and all design, manufacturing, reproduction, use, patent rights and sales rights are expressly reserved by samtec, inc. this document shall not be disclosed, in whole or part, to any unauthorized person or entity nor reproduced, transferred or incorporated in any other project in any manner without the express written consent of samtec, inc. proprietary note * * bh "j" ref fig 10 (qth-090-01-x-d-a-rt1 shown) (not available with -lc, -gp, or -fl options) (available on -01 only) (same as fig 1, except as shown) c l qth-30-01-d-xx-x-rt1 c .190 4.83 .100 ref 2.54 .070 1.78 ref "k" .004 [.01] t-1r36-01-f (2 plcs) c .062 ref 1.57 .069 1.76 ref "m" .010 0.25 ref (typ) .053 .002 1.35 0.05 "n" c c c qth-30-01-d-xx-l wt-56-01-t t-1s39-01-xxx "l" ref fig 11 l: latching option (qth-060-01-x-d-l shown) (available on -01 lead style only) (not available with -lc, -gp, -fl, or -rt1 options) (same as fig 1, except as shown) .025 0.64 ref .020 0.50 ref c l (* = not released) cpc this sheet c7, c8, c9, c10, c11,c15 sheet of .5mm double row hs terminal assembly by: qth-xxx-xx-x-d-xxx dwg. no. description: do not scale drawing dean p 09-14-2010 6 5 sheet scale: 2:1 revision bh f:\dwg\misc\mktg\qth-xxx-xx-x-d-xxx-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322
this document contains confidential and proprietary information and all design, manufacturing, reproduction, use, patent rights and sales rights are expressly reserved by samtec, inc. this document shall not be disclosed, in whole or part, to any unauthorized person or entity nor reproduced, transferred or incorporated in any other project in any manner without the express written consent of samtec, inc. proprietary note * * user direction of unreeling pocket not detailed "h" "h" section "h"-"h" scale 1.5 : 1 fig 12 -tr: tape & reel (qth-090-01-x-d-lc-tr shown) (-090 pos max) (-060 pos max w/-gp option) (n/a on -05 thru -08) (same as fig 1, except as shown) cpc this sheet sheet of .5mm double row hs terminal assembly by: qth-xxx-xx-x-d-xxx dwg. no. description: do not scale drawing dean p 09-14-2010 6 6 sheet scale: 1:1 revision bh f:\dwg\misc\mktg\qth-xxx-xx-x-d-xxx-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322
|
